Profile: SLV8 is available in the following standard widths: 20mm, 30mm, 50mm and 85mm. Can be purchased in other widths onrequest. Megadyne Isoran® RPP Silver rubber timing belts have fiberglass reinforcement and are born with nylon webbing on the tooth side.The belt is endless without a joint. Standard SLV8 profile – is a timing belt with millimeter tooth pitch and cup-shaped teeth. Timing belts are nowadays an important part of many machines, timing belts are primarily used for power transmission. A timing belt can best be described as a belt with integrally molded teeth on the inside, which ensures the position of the timing belt in the timing belt pulley. By using a timing belt with an SLV8 profile, you can build a belt drive with synchronous properties with great precision. Megadyne Isoran RPP Silver is a timing belt with reinforced properties, which ensures the timing belt a right tensile strength approx. 100% more than a standard HTD or RPP timing belt. * High efficiency due to positive engagement between timing belt and timing belt pulley. * The fiberglass reinforcement provides excellent tensile strength, flexibility and high resistance to elongation. * High precision in your belt drive. * Improved stress distribution * Temperature range: -25° C to + 100° CStandard timing belts are produced according to applicable DIN and ISO standards. All Megadyne ISORAN RPP Silver timing belts comply with the REACH directive.

Important: These timing belts are cut to width to order and cannot be returned

Example of timing belt: 600-SLV8-30

30 = Width in mm. SLV 8 = Type/Tooth spacing in mm. 600 = Length in mm.

Also called by other brands:

MEGADYNE – ISORAN SILVER ® SLV8 OPTIBELT – OMEGA ® HP 8M GATES – PowerGrip ® GT3 8M CONTITECH – CONTI SYNCHROFORCE ® CXP 8M